CN
EN
??
Espa?o-
QLS-0101 QLSB series ● Static, non continuous rotation torque strength testing. ● Working voltage DC3.3-15 v ● Rated output: 1.0-2.0 + / - 10% mV/V ● Low input/impedance: 350 Ω plus or minus 1% ● The low insulation resistance: more than 5000 MΩ ● Operation temp range -20~80℃ ● Low allowable load: 120% F.S QLSU、QLSI、QLSC series The specially designed Two end face used to install the bearing, axis of rotation through the middle, is used to tighten the real-time detection of the process, data recording, alar... -
QLS-0204 Features & Applications ◇ Constituted by strain gauge sensitive components and integrated circuits; ◇ High precision with stable and reliable performance; ◇ This sensor can be operated long-term in high-speed without wear ring and other wear parts,the output is OK for positive and negative torque signal; ◇ Both ends are keyed; ◇ Maximum speed of torque cannot over 4000r/min; Capacity：0.1，0.2，0.3，0.5，1，2，3，5，10，20，30，50，100，200，300，500N.M Technical Parameters Size and Capacity ... -
QLS-0203 Featrues ◇ Aluminum alloy. ◇ Used for torque force measuring of small range. Wiring code -
QLS-0201 Summary ◇ Static torque sensor with metal foil strain gauge technology and compact structure .Made of aluminum alloy ◇ Used for static, non-continuous rotational torque force measurement ◇ Working voltage DC24V 0-10 v output voltage or 4-20 mA ◇ Can be directly connected to the PLC, suitable for automation equipment online tests Technical Parameters ● Low capacity:1 N. m - 30 N. m ● Rated output: 2.0 + / - 10% mV/V ● non- linearity: 0.30.25%F.S ● Low hysteresis sex: 0.30.25%F.S ● Low repeatabili... -
QLS-0200 Summary This type is mainly used for rotating torque detection, measuring is applicable. N.m ranging from 0.05 to 2000 n. m to choose from, high precision, good security. Widely used in pneumatic screwdriver, electric screwdriver and auto parts, mechanical arm, the robot and the torsion test. Technical Parameters ● Low accuracy: + / - 1% + 1 ● Low direction: left and right ● Low display: 7 segment LCD ● Low measurement mode: PEAK/RUN ● Low data memory: 999 ● Low computation function: sample si... -
QLS-0104 Summary Mainly used for screw tightening and loosening of torsion test, also can be installed on the device used for torque test of various kinds of products. Technical Parameters ● Capacity: 0.002 N.m - 50 N. m ● Sensitivity: 1-2mV/V ● The input/out impedance: 350Ω or 1000Ω±1% ● Insulation impedance: more than 2000 m Ω ● The effects of temperature on the zero point: ±0.01%R.O./℃ ● The effects of temperature on the output: ±0.01%/℃ ● Allow the overload : 120% R.C Product size table ...
推薦產(chǎn)品 RECOMMENDED PRODUCTS
- Tel:0086-574-87834466 0086-574-87890640
- Fax:0086-574-87890641
- E-mail:sales@fff-motive.com
- Website:www.df-air.com
- Add:No. 999, Mingshu Road, Jiangshan, Ningbo
Share：
